DCC Concepts Accessory Decoder CDU Solenoid Drive SX 8-Way - Power-Off Memory and Protective Casing

DCD-ADS-8sx
  • £74.95
  • Save £5.01


 
DCC Concepts ADS-8sx is a model railway point and solenoid accessory decoder with 8 outputs with many must-have features. ADS-8sx has common-right-left DC outputs for standard low cost solenoid type motors. ADS-8sx will handle a wide power or track bus voltage and draws very little current. ADS-8sx can connect directly to the track power or to your power bus. As it only uses power for a short time whilst it charges its capacitors (one per channel) it will not use vital power needed for running Locos. Addressing decoder outputs is as simple as flicking a switch and sending a command with your DCC system. No CV programming is required! Connections are straightforward and marked on the printed circuit board and to install ADS-8sx is very easy.
  • Power off memory
  • Protective aluminium casing
  • CDU discharge button
  • Screw terminals - no soldering!
  • A single two wire power connection for all 8 channels
  • Powerful - each output easily changes two Peco or Hornby motors
  • High power connections for point frogs and/ or mimic panel LEDs and/ or signalling
  • Only three wires to the accessory needed for operation
  • Terminals to connect a manual switch to as a "best of both worlds" option
  • I/O terminal for position feedback or computer interface
  • Easy "Teach" / "Operate" switch for addressing each output
ADS-8sx is powerful enough to control multiple point motors from the same output, so you wont need as many ADS-8sx as you think.